Securing To A Transport Vehicle; Towing; Forklift Points - Snorkel MHP15J Operator's Manual

10. Stowing and Transporting

Forklift points

Figure 10.4 - Forklift Points

Securing to a Transport Vehicle

5. Tie down only with the 4 tie down lugs.
DO NOT
Tie down over the draw bar.
Tie down over the booms or level rods.
Tie down over the platform.
Reverse the above procedure after transporting.

Towing

The correct size tow ball MUST be used when
connecting the draw bar to the towing vehicle.
The coupling is stamped with the correct size.
Be aware of local transport regulations.
1. Visually inspect the tow ball on the towing
vehicle.
2. Ensure the tow ball is matching in size with
the tow coupling on the trailer.
3. Ensure the tow ball is mounted correctly and
is fitted tightly.
4. Connect the tow coupling and ensure the
latching mechanism is working and has
latched.
5. Connect the break-away chain to the towing
vehicle, unset the reversing lock on the tow
coupling.
6. Check that the bolt, D-Clamp or attaching
device is able to take the rated load.
7. Connect the trailer road lights to the towing
vehicle and test that the functions work.
8. Retract the jockey wheel and place it in the
stowed position (see photograph top right).
page 10 - 2
9. Check the covers are secure and no debris
or work tools are in the platform.
DANGER
Death or Serious Injury can result from
losing control of a trailer when towing.
Never tow above the rated speed marked on
the draw bar.
Never tow the unit with an under rated
vehicle. Always check manufacturers
vehicle load specifications.
DANGER
BOTH Boom Restraints MUST be in place
whilst the trailer is being towed.
MHP15J – 11995A