Table of Contents
Advertisement
SWL 200 KG
Attach lanyard
of fall restraint
to loop below
0150448
CAUTION
SAFETY BELTS WITH
SHOULDER STRAPS OR
SAFETY HARNESS ARE
TO BE USED
MHP15J – 11995A
LOWER
BOOM
UPPER
BOOM
JIB
BOOM
2025-200
9928
EMERGENCY LOWER
1.
TO LOWER PLATFORM, OPERATE EMERGENCY
LOWER SWITCH.
2.
TO SLEW BOOM, OPERATE 'EMERGENCY
LOWER' & 'SLEW' SWITCHES TOGETHER.
SLEW
LIFT
ENABLE
11420 - 1
DANGER
BEWARE OF ELECTRICAL HAZARDS
REGULATION 133A OF THE
CONSTRUCTION SAFETY ACT 1912 REQUIRES
(a) Minimum approach of an appliance
to live electrical apparatus.
(b) Inspection of the work site for
electrical hazards before
commencing to use the appliance.
(c) Constant vigilance and an observer required
whilst working or travelling the appliance
in the vicinity of live electrical apparatus.
(Australia Only)
WARNING
KEEP
CLEAR
OF
Unless the Electrical Supply Authority has advised
in writing otherwise;
the clearance between any live overhead
power line and any part of this machine or
load carried is required by law to be
AT LEAST 4 METRES
This is a requirement of regulation 93 of the
Electrical Supply Regulations 1984
in the interests of safe working.
(New Zealand Only)
1. Safety
EMERGENCY
LOWER
ROTATE
PLATFORM
CHOKE
SPEED CONTROL
3m. for voltages up to 132,000
6m. for voltages above 132,000
and up to 330,000
8m. for voltages above 330,000
POWER
LINES
page 1 - 7
Advertisement
Table of Contents
