Clutch Spring; Engine; Removing Shroud; Removing The - Stihl 4141 Series Manual

4.4

Clutch Spring

– Remove shroud - see 5.1.
– Remove clutch housing and
clutch - see 4.1.
Removing the spring
Twist the clutch shoes in the
direction of the arrows. This
relaxes the spring so that it can
be unhooked and removed.
Fitting the spring
Engage spring in holes and slide
clutch shoes together in the
direction of the arrows.
10
Important:
Check installed position of spring.
The arrows on the clutch shoes face
upwards.
Install the clutch shoes and clutch
housing - see 4.2.
5

Engine

5.1

Removing Shroud

1
Remove screws (1 and 2) from
rewind starter.
Pull off the spark plug boot.
Take out screw (1) on clutch
housing.
Lift away the shroud and slip the
spark plug boot through the
shroud at the same time.
Series 4141 Powerhead
2
1