Use press sleeve (1)
1127 851 8300 to remove clutch
drum.
Series 4141 Powerhead
4.3.1
Replacing Bearings
1
Use circlip pliers to remove circlip
from clutch housing.
Use press arbor (1)
4119 893 7200 to remove the
clutch drum ball bearing from the
outside inwards.
Note:
Take care not to damage guide
pegs on clutch housing during
removal process.
Use press arbor (1)
4116 893 7205 to install the new
bearing.
– Secure bearing in position with
circlip.
1
1
Press home the clutch
drum (2) with assembly drift (1)
1110 893 4700.
– Install the circlip.
Reassemble in the reverse
sequence.
1
2
9