Mercedes-Benz Sprinter Operating Instructions Manual page 96

94 Light and vision
5
Backing up light: P 21 W
6
Rear fog light (driver's side): P 21 W
7
License plate lamp: R 5 W
Replacing the tail lamps on the chassis
Requirements:
Rear fog lights: bulb type P 21 W
R
License plate lighting: bulb type R 5 W
R
Backing up lights: bulb type P 21 W
R
Turn signal lights: bulb type PY 21 W
R
Clearance lamps: bulb type R 5 W
R
Brake lights: bulb type P 21 W
R
Tail lights: bulb type R 5 W
R
1
Light lens
2
Screws
3
Rear fog light
4
License plate lamp
5
Backing up light
6
Turn signal light
7
Clearance lamp
8
Brake light
9
Tail light
Switch off the lighting system.
#
Unscrew screws 2
#
1.
Remove the plug from the bulb mount.
#
Gently turn the bulb counter-clockwise and
#
take it out of the socket.
Insert the new bulb into the socket and turn it
#
clockwise.
Position light lens 1
#
and remove light lens
and tighten screws 2.
Replacing interior light bulbs
Replacing rear interior lamps
Requirements:
%
For the standard bulb failure indicator func‐
tion to work correctly, only lights bulbs must
be used that are the same type and power as
those installed during production.
Switch off the interior lighting.
#
Press in catch spring of lens
#
ble object e.g. a screwdriver, and then lever
off the lens with the lamp housing.
To pull back lens from the lamp housing:
#
press the lugs of lens
Remove light bulb
#
Insert the new light bulb.
#
Insert the lens in the lamp housing until it
#
engages.
Place the lens with the lamp housing in posi‐
#
tion and engage it.
1 with a suita‐
2 inwards.
3 from the lamp housing.