Mercedes-Benz Sprinter Operating Instructions Manual page 90

88 Light and vision
Variant 4
1 c Switches the interior lighting on/off
#
Adjusting interior lighting on bus equipment
1
i Activates/deactivates bus function
2
p Switches the front left reading lamp
on/off
3
| Activates/deactivates automatic inte‐
rior lighting control
4
c Switches the front interior lighting
on/off
5
w Switches passenger compartment light‐
ing on/off
6
p Switches the front right reading lamp
on/off
7
j Switches reading lights in the
passenger compartment on/off
To activate the bus function: press button
#
1.
The LED lights up.
The bus function is in one of the following
modes:
Stop mode
R
If the vehicle comes to a halt at a bus
stop, for example, and the passenger door
opens, the passenger compartment will
be illuminated and undimmed.
Driving mode
R
If all doors are closed and the vehicle is
traveling faster than walking pace, the
passenger compartment will be illumina‐
ted but dimmed.
Automatic off mode
R
If automatic interior lighting control
deactivated, and thereby automatic off
mode is active, the passenger compart‐
ment will be continuously illuminated
(dimmed).
When the bus function is activated, the
passenger compartment lighting on/off modes
can be selected using button 5. Passenger com‐
partment lighting is then deactivated completely.
When button 5 is pressed again to switch
passenger compartment lighting on/off, the bus
function is again in one of the modes.
If automatic interior lighting control
R
previously activated, automatic off mode will
be inactive again.
If automatic off mode was not previously acti‐
R
vated, either driving or stop mode is active.
%
The bus function can be used to switch
passenger compartment lighting on/off with‐
out using button 5. The passenger compart‐
ment lighting must not be switched on
beforehand.
To deactivate the bus function: press but‐
#
ton 1.
The LED does not light up.
To switch the front left reading lamp on
#
or off: press button 2.
To deactivate the automatic interior light‐
#
ing: press button 3.
The interior lighting control will switch on
automatically, for example, if you:
Unlock the vehicle
R
Open a door
R
To switch front interior lighting on or off:
#
press button 4.
3 is
3 was