Table of Contents
Advertisement
Industrial Electronic Devices
NEW CONFIGURATION / OPEN CONFIGURATION:
The
"New
Configuration" button creates the folder which contains the entire device's configuration.
A device's configuration can also be imported or exported:
To clone the configurations of a programmable "IO-Link / PROFINET Slave - Converter"
in order to configure another device in the same manner, it is necessary to maintain
the folder and all its contents;
To clone a project in order to obtain a different version of the project, it is sufficient to
duplicate the project folder with another name and open the new folder with the button
"Open
Configuration".
ADFweb.com Srl – IT31010 – Mareno – Treviso
User Manual IO-Link / PROFINET Slave
Document code: MN67876_ENG
Revision 1.000
INFO:
www.adfweb.com
Page 17 of 38
Phone +39.0438.30.91.31
Advertisement
Table of Contents
