Installation
Appliance description
2.
Appliance description
2.1
Standard delivery
The following are delivered with the appliance:
- Sieve inside the cold water inlet
- Special aerator "SR"
- Connection hose 3/8, 500 mm long, with gaskets*
- Tee 3/8*
*for the connection as pressure-tested appliance
2.2
Accessories
Special aerator "SR"*
- SR 3: Part number 289591
for DHM 3 and DHM 4
- SR 5: Part number 270582
for DHM 6 and DHM 7
* For use in thread M22/M24.
Pressure-tested tap
- WSH 10 | WSH 20 Sensor tap for washbasins
www.stiebel-eltron.com
Non-pressurised taps
- WSN 10 | WSN 20 Sensor tap for washbasins
- MAZ Twin lever basin tap
- MAE Mono lever basin tap
ZTA 3/4 - central thermostatic valve
Thermostatic valve for central premixing, for example for opera-
ting an instantaneous water heater with a solar thermal system.
3.
Preparations
f Flush the water line thoroughly.
f
Water installation
A safety valve is not required.
Taps
f Use suitable taps (see chapter "Appliance description /
f
Accessories").
Note
Fitting the special aerator supplied provides an optimum
water jet.
DHM |
21