STIEBEL ELTRON DHM 3 Installation Manual page 24

Installation
Installation
f Using pliers, break out the knock-out for the power cable f
in the appliance cover. Correct the contours with a file if
necessary.

f Use the appliance back panel as a drilling template. f
f Secure the appliance back panel to the wall with suitable f
rawl plugs and screws.
24 | DHM



f Route the power cable through the cable entry in the back f
panel.
f Hook in the appliance cover with the heater at the bottom. f
f Click the heater into place using the snap fastener. f
f Secure the appliance cover with the cover fixing screws. f
4.2.2 Tap installation
Material losses
!
When making the connections, counter the torque on the
appliance using a size 14 spanner.
Pressurised connection
f Fit the 3/8 connection hose provided and the 3/8 tee. f
f Install the tap. For this, also observe the tap operating and f
installation instructions.

www.stiebel-eltron.com