Table of Contents
Advertisement
3
To stop monitoring, click the
The still images shot at that moment are displayed
in the monitor windows.
4
To exit the Operator tool, click
corner of the window or select Exit the application
under File on the menu bar.
To zoom in/out the image
You can zoom in or out the image of the camera using
the
and
buttons at the bottom of the monitor
window.
Zoom in button
Zoom out button
To zoom in, click the
To zoom out, click the
The image zooms in or out gradually each time you click
the button.
To zoom in/out the zoom camera
You can zoom the zoom camera in or out rotating the
center wheel of the mouse.
To save a snapshot
You can take a snapshot (still image) of the camera
image using the
button at the button of the monitor
window and save it as a JPEG file.
1
Click the
button.
A snapshot is captured and displayed in the still
image display window.
22
Monitoring Live Images
button.
at the upper right
button.
button.
2
To save the snapshot in a file, click the Save button.
The Save As dialog appears.
3
Specify the destination to which the image file is to
be stored and the file name, and click OK.
The captured image is saved in the JPEG format.
4
To close the still image display window, click the
Close button.
Operating the Zoom Camera in
Auto Mode
When you click the
(auto mode) button at the bottom
of the zoom camera monitor window, the zoom camera
enters the auto mode during live monitoring and
recording. (When Operator Tool starts, the auto mode is
set automatically.)
There are two auto modes: Focus area mode and Tour
mode. Select either mode in the Shooting parameter
set assignment window.
For selecting the auto mode, see Step 4 of "Assigning the
Shooting Parameter Set" on page 14.
Focus area mode
In Focus area mode, the zoom camera shoots a moving
object with the predetermined zoom and focus settings
when the moving object appears in the focus area.
If there are multiple moving objects in two or more
focus areas, the focus area located at the left-most end of
the panorama camera monitor window has priority. For
changing the priority order, see "To give the priority
order for a focus area" on page 36.
Tour mode
In Tour mode, the zoom camera automatically tracks
and shoots a moving object.
If there are multiple moving objects, the zoom camera
shoots the one that has the highest priority.
The zoom camera can be set to shoot all the moving
objects equally if you select Track multiple moving
objects in the Tour setting tab of the System setting
dialog.
Note on the display of moving object
The moving object that the zoom camera shoots next is
indicated with a pink frame in the panorama camera
monitor window.
The moving object that the zoom camera has shot is
indicated with a pale pink frame in the panorama camera
monitor window.
To cancel the auto mode
Click the
(manual mode) button to enter the manual
mode.
Advertisement
Table of Contents
