Sony Ipela XI's XIS-10DC User Manual page 13

4
Select the Use the camera checkbox for the camera
you want to use, then enter the IP address and port
number.
The IP address and port number to be entered for
the panorama camera should be the same as those
registered for the XIS-NT10 in the IP Setup
Program, and the IP address and port number for
the zoom camera should be the same as those for
the SNC-RZ30N/P.
5
Click the Apply button, and click OK when the
message "Saved" appears.
6
Click the Close button to close the Camera
information dialog.
7
To exit the Administrator Tool, click the Close
button or select Exit the application under File on
the menu bar.
To connect the camera via a proxy server
Set the proxy server on Administrator Tool.
1
Select System setting under Tool on the menu bar.
The System setting dialog appears.
2
Select the Communication setting tab.
3
Select the Use a proxy server between camera
and server checkbox and enter the IP address and
port number of the proxy server.
4
Click the Apply button, and click OK when the
message "Saved" appears.
Connecting the Camera to Network
13