Table of Contents
Advertisement
boxes of the cameras, the auto mode, and the day/
time select box.
p Close button
Closes the shooting parameter set assignment
window.
Monitoring Live Images
This section describes the procedures for monitoring
camera images in the main window.
To record images during monitoring, see "Recording
Images" on page 25.
Notes
• When you use the camera for the first time, perform
the shooting parameter set assignment. See page 14.
• When you exit Operator Tool, the application retains
some operating modes in memory, and the same
modes are applied when you start the tool next time
(Resume function). The live monitoring mode,
scheduled recording mode, recording mode and stop
mode are retained.
• Operator Tool starts in "stop" mode regardless of the
operating mode used last time, if it starts after
Administrator Tool has exited. In this case, select the
appropriate operating mode.
1
Double-click the WODs icon on the desktop.
The main window opens.
2
Click the
(live shooting) button.
Live shooting starts and live images are displayed
in the monitor window of each camera.
The panorama camera detects a moving object and
the zoom camera zooms up the image of the
detected moving object.
Image of panorama camera
Image of zoom camera
Note
The images of fixed cameras 1 and 2 are displayed
only when the cameras are connected.
Image of fixed camera 1
Image of fixed
camera 2
21
Monitoring Live Images
Advertisement
Table of Contents
