Sony Ipela XI's XIS-10DC User Manual page 10

2
Double-click the WODs_Administrator icon to
start Administrator Tool.
The main window of Administrator Tool opens.
3
Select Camera information under Tool on the
menu bar.
The Camera information dialog opens.
4
According to the camera installation position,
select the appropriate option from among
Panorama camera downward, High position,
Panorama camera downward, Low position,
Panorama camera upward, High position and
Panorama camera upward, Low position.
Then click Easy setting.
10
Connecting the Camera to Network
1 Select according to the camera installation position.
Panorama camera
downward
High position: The panorama camera is installed more than 3
m above ground.
Low position: The panorama camera is installed less than 3 m
above ground.
The IP addresses are assigned to the cameras and
displayed.
The Use panorama camera and Use zoom
camera checkboxes are selected to show the
cameras are available.
IP address assignment is now completed.
Note
If the Easy setting button is disabled (in gray),
clear the Use panorama camera and Use zoom
camera checkboxes to enable it.
5
Click the Close button to close the Camera
information dialog.
6
To exit the Administrator Tool, click the Close
button or select Exit the application under File on
the menu bar.
Default network setting of the camera
The factory network setting of the camera is as follows:
XIS-NT10
IP address: 192.168.10.11
SNC-RZ30N/P
IP address: 192.168.10.12
2 Click.
Panorama camera
upward