Operating The Camera; Controlling Via The Control Panel (Operation Common To Area Zoom Mode And Vector Dragging Mode) - Sony SNC-WR600 User Manual

Control bar
The following operation buttons are available.
Setting
You can set the streaming method, image size,
frame rate, PTZ operation mode and image codec.
Streaming start button
Starts streaming. (Appears while stops streaming.)
Streaming stop button
Stops streaming. (Appears while streaming.)
Preset
Select a preset position to move the camera to the
registered preset position.
(Displayed only when a camera preset position is
registered.)
Save still image button
Captures still images taken by the camera and saves
them to the computer.

Operating the Camera

There are three modes of camera operation: Area zoom
mode, Vector dragging mode and PTZ Control bar.
You can control pan/tilt, zoom and focus in either mode.
The available functions for the camera operation modes
vary according to the live viewer display. The available
functions are as follows:
ActiveX
viewer
Operation from
a
control panel
Area zoom
a
Vector dragging
a
×
PTZ control bar
Controlling via the control panel
(Operation common to Area zoom
mode and Vector dragging mode)
You can operate the camera direction, zoom, and focus
by using the control panel for the monitor image
currently displayed.
Pan/Tilt control
Click the arrow button in the direction in which you
want to move the camera. Keep it pressed to move the
camera continuously.
To return to the home position, click
Note
When Auto flip set to On (page 48), if you hold
or to make the direction of the camera pass through
the point where it faces the ground, the auto flip function
is activated, and the displayed picture is reversed.
Plug-in free viewer
JPEG/
JPEG ActiveX
Flash
× × ×
a a a
a a a
×
a a
.
,
15
Operating the Camera