Download  Print this page

Camera Control Mode Setting Section - Sony SNC-DP10 User Manual

Hide thumbs

Advertisement

Camera control mode setting
section
Mode
Select the answer level of when you use the arrow button
of the control panel. When you press Step, the answer
levels are displayed and you can select one of them. But
their use is limited in this camera. (Refer to "Control
panel" below.)
Control panel
Select the display direction and display mode of
direction of the camera. This setting is valid when the
Camera mode is set to DualHalfWide.
Directional arrow: The center of the display can be
moved left or right when DualHalfWide mode is
selected. It does not respond to an up or down
command.
Central round: The center moved by the Directional
button is placed back to the point of factory default.
WIDE/TELE: It cannot be used in this camera.
Radio selector: When you select home, the center
moved by the Directional button is placed back to the
point of factory default.
PT MODE: It switches Directional arrow display mode
and Tablet display mode. In Tablet display mode,
only an operation toward left or right is active in
common with Directional arrow mode.
OK/Cancel
See "Buttons common to every setting page" on page
12.
Setting the Camera — Camera setting Page
19

Advertisement

Table of Contents

   Related Manuals for Sony SNC-DP10

Comments to this Manuals

Symbols: 0
Latest comments: