System Overview; Live Page; Playback; Configuration - Sony SNC-HMX70 User Manual

System overview

When a connection is established, the LIVE page is
initially displayed. The application bar displays the
following items:
– LIVE,

– PLAYBACK,

This link is only visible if a storage medium has been
configured for recording. (With VRM recording this
option is not active.)

– Configuration.

Getting help
To get context sensitive help for a particular page, click
the help icon .

Live page

The LIVE page is used to display the live video stream
and control the unit.
Playback
The PLAYBACK page is used for playing back
recorded sequences.
Configuration
The Configuration page is used to configure the unit
and the application interface.
Making Changes
Each configuration screen shows the current settings.
You can change the settings by entering new values or by
selecting a predefined value from a list field.
Not every page has a Set button. Changes to pages
without a Set button are set immediately. If a page does
show a Set button, you must click the Set button for a
change to take effect.
Caution
Save each change with the associated Set button.
Clicking the Set button saves the settings only in the
current field. Changes in any other fields are ignored.
Some changes only take effect after the unit is rebooted.
In this case, the Set button changes to Set and Reboot.
1
Make the desired changes.
2
Click the Set and Reboot button. The camera
reboots and the changed settings are activated.
5