Related Manuals for LogTag UTRIX-16
Summary of Contents for LogTag UTRIX-16
- Page 1 LogTag Recorders Ltd UTRIX-16(M) USB PDF Temperature Recorder Product User Guide Document Release Version: 2.0 Published 29/08/2016 ® Copyright © 2004-2016, LogTag Recorders...
-
Page 2: Table Of Contents
Initial release. Updated for UTRIX-16M multi-alarm 29 Aug 2016 Stefan Lenz features, added alarm configuration section, updated factory profile page ® Page 2 of 16 UTRIX-16(M) Product User Guide, Revision 2.0, copyright © 2004-2016, LogTag Recorders . All rights reserved. -
Page 3: Safety Information
... the device is stored and operated according to LogTag Recorders ’ recommendations. Disclaimer The UTRIX-16(M) monitors temperature exposure and not the quality of the goods it accompanies. Its purpose is to signal if product quality evaluation/testing is required. Typographical Conventions Text refers to buttons on the UTRIX-16(M). -
Page 5: Introduction
Follow the instruction to install and start the software. permanently plugged in USB extension cable to protect your If you only plan on evaluating data, plug the UTRIX-16(M) into a computer’s USB socket. computer‘s USB socket. Depending on the settings made during A computer running Windows XP or later, Mac OSX or Linux. -
Page 6: Standard Configuration Options
Analyzer will scan all USB ports and display the configuration options for connected UTRIX-16(M)‘s. Although you can configure many devices at the same time, it is practical to limit the number of devices to about 10, using a powered USB hub. It is not possible to configure different models at the same time. -
Page 7: Configuring Multiple Alarms
LogTag Analyzer. Any additional upper alarms must have higher threshold values If you configure the UTRIX-16(M) to start after a delay period, the than any previously entered alarm. recorder will not immediately record temperature readings after Any additional lower alarms must have lower threshold values... -
Page 8: While Recording
ALERT Microsoft Windows indicator blinks every 4 seconds. Depending on the alarm Up to four drivers will now be installed, depending on the UTRIX-16 configuration the red indicator may remain on for the rest of the trip, (M)'s configuration. or the green... -
Page 9: Accessing The Files
Unplugging You can unplug a UTRIX-16(M) at any time; there is no need to stop the device via the shortcut menu in the notification area on the taskbar. If you plug a unit into a USB port during a start delay, the delay period will re-start when the unit is unplugged. -
Page 10: Light Patterns On Usb Recorders
2 ALERT for the recorder to stop. seconds The UTRIX-16(M) is connected to a USB port and waiting for USB Two quick flashes of the green indicator Ready for USB communication. every second The UTRIX-16(M) is generating files. No USB activity will be... -
Page 11: Interpreting The Data
LogTag_[serial_number]_[trip number]_[file creation date]_file creation time]_[OK or ALM]. USB Paused Readings A gap is shown in the graph where the UTRIX-16(M) was plugged into Recorder Information and Configuration a USB port at the time it would otherwise have taken a reading. -
Page 12: Data Evaluation - Report With Multiple Alarms
Alarm Status Box Recorder Information and Configuration This shows at a glance if the UTRIX-16(M) recorded alarm conditions On recorders with multiple alarms these sections are combined and ✖ during the trip (showing a red... -
Page 13: Data Evaluation - Data List
Marked readings In the data list readings are marked after the temperature value..with a + symbol where the UTRIX-16(M) has been downloaded ® with LogTag Analyzer. -
Page 14: Utrix-16(M) Factory Presets
If a default configuration does not suit, customers can compile their own profile by specifying the parameters in the tables below when ordering. ® Please note that minimum order quantities apply for UTRIX-16(M) recorders with profiles not stocked by LogTag Recorders . - Page 15 Accumulative = temperature readings are above (below) the threshold for the total time defined in the activation delay time, but may not necessarily be sequential. Only on model "M" with multiple alarms. ® Page 15 of 16 UTRIX-16(M) Product User Guide, Revision 2.0, copyright © 2004-2016, LogTag Recorders . All rights reserved.
-
Page 16: Technical Specifications
Technical Specifications Model Numbers Environmental UTRIX-16 - Multi-Trip PDF Temperature Recorder with dual alarms IEC 60529: IP64 with USB cap fitted UTRIX-16M - Multi Trip PDF Temperature Recorder with 6 alarms Fits into IP67 Protective Enclosure 200-000020 Temperature Sensor Measurement Range Case Material -25°C to +70°C (-13°F to +158°F)