Quickstart Guide Contents What's Included Battery Installation Downloading LogTag Analyzer Confi guring your UTRED30-WiFi Downloading the Connection Wizard Running the Connection Wizard Connecting to your WiFi Network LogTag Online Creating a Location Installing the Wall Mount Starting your UTRED30-WiFi Distributed by MicroDAQ.com, Ltd.
What's Included Please check you have each of the items shown below before continuing with setting up your UTRED30-WiFi. USB Cable UTRED30-WiFi Wall mount External Probe (Not included) (Not included) Page 3 Distributed by MicroDAQ.com, Ltd. www.MicroDAQ.com (603) 746-5524...
1. You will need a small phillips (cross-shaped) screwdriver to remove the cover on the back of the UTRED30-WiFi case. 2. Once you have removed the battery cover, install the 2 AAA batteries provided in the product. Take note of the direction each battery must be installed.
4. Follow the on-screen prompts to install LogTag Analyzer 5. Click ‘Finish’ to exit the Setup Wizard Note: If you already have the LogTag Analyzer installed, please see whether you need to update to the latest version by clicking ‘Check Internet for updates’...
1. Open LogTag Analyzer 2. Click ‘Configure’ from the ‘LogTag’ menu or click the ‘Wizard’ icon 3. Adjust your logger configuration settings as required. For more information on configuration settings, please refer to...
The unit requires you to connect it to your WiFi Network. To do that, we have an easy tool for you to use called the LogTag Online Connection Wizard. To download the LogTag Online Connection Wizard, please open your browser and type the link below to begin the download: https://logtagrecorders.com/download/connectionwizard.exe...
“Next”. You will be asked to sign in to your LogTag Online account. If you do not have an account, click the link below or alternatively, open your browser, type the following link into the address bar and follow the on-screen instructions.
Connecting to your WiFi Network Type your LogTag Online account details and click “Sign In”, followed by “Next”. The Wizard will now scan for any connected LogTag devices. If the scan doesn't find any devices, double-check the device is plugged in to your computer with the USB cable provided and click “Scan...
Page 10
1. Click the dropdown arrow and your WiFi device will begin searching for nearby Wireless Networks. Note: This process can take up to 2 minutes, please wait whilst the network scan is in progress. 2. Once you have selected your WiFi Network from the list, type the password for the network.
Page 11
WiFi network and to LogTag Online. 1. Once the Wizard displays “Connection Succeeded”, click “Next” to complete the Wizard. 2. Click “Close” to close the Wizard or click the ‘LogTag Online Sign In page’ link to take you to LogTag Online website. Page 11 Distributed by MicroDAQ.com, Ltd.
LogTag Online LogTag Online is a secure online service that stores the data recorded from your logger against your account. Signing in to your LogTag Online Account Open your browser and navigate to: https://logtagonline.com 1. Type your Email and Password 2.
Locations page. For more information on completing the fields, or to edit/delete Location please refer to the LogTag Online user guide. Tip: You can pin/unpin a Location to your dashboard by clicking the small “plus/minus” icon in the top right corner to show real-time data from the UTRED30-WiFi In LogTag Online.
Wall Mount. Before sticking on the Wall Mount, make sure the sensor cable and the USB cable from the UTRED30-WiFi can both reach the device comfortably without obstruction or at risk of being accidentally disconnected if knocked.
Starting your UTRED30-WiFi Press and hold the START/ Clear/Stop button. STARTING will appear along with READY. Release the button once READY disappears. The UTRED30-WiFi now records temperature data. The Logger will not start if you: • Release the button before READY disappears.