Moving Off - Triumph Bonneville T100 Series Owner's Handbook Manual

Hide thumbs Also See for Bonneville T100 Series:
Table of Contents

Advertisement

How to Ride the Motorcycle
Caution
Running the engine with low oil
pressure will cause severe engine
damage.
To start the engine:
Check that the engine stop switch is
in the RUN position.
Make sure the transmission is in
neutral.
Turn the ignition switch on.
Note
When the ignition is switched on, the
instrument warning lights will illuminate
and will then go off (except those which
normally remain on until the engine
starts, see the Warning Lights section).
Pull the clutch lever fully into the
handlebar.
Leaving the throttle fully closed,
push the starter button until the
engine starts.
The motorcycle is equipped with
starter
lockout
switches
prevent
starter from operating when the
transmission is not in neutral with
the side stand down.
If the side stand is extended whilst
the engine is running, and the
transmission is not in neutral then
the engine will stop regardless of
the clutch lever position.
82
Continued
switches.
The
the
electric

Moving Off

To move the motorcycle:
Pull in the clutch lever and select
first gear.
Open the throttle a little and let out
the clutch lever slowly.
As the clutch starts to engage, open
the throttle a little more, allowing
enough
engine
stalling.
speed
to
avoid

Advertisement

Table of Contents
loading

Table of Contents