Riding Modes - Triumph Bonneville T100 Series Owner's Handbook Manual

Hide thumbs Also See for Bonneville T100 Series:
Table of Contents

Advertisement

General Information
To reset the hour display:
Make sure the hour display is still
flashing then press and release
the SCROLL button to change the
setting. Each individual button press
will change the setting by one digit.
When the correct hour display is
shown, press and hold the SCROLL
button for one second. The hours
display is set and the minutes
display will begin to flash. The
minutes display is adjusted in the
same way as for the hour display.
Once both hours and minutes are
correctly set, press the SCROLL
button for one second and the
display will cease to flash.
44

Riding Modes

Note
Riding
modes
models
except
Bonneville T100 Bud Ekins.
The riding mode system allows the
selection of riding modes with specific
traction control and throttle response
settings.
Riding modes are selected using the
MODE button on either the left or
right hand handlebar switch housing,
depending on the model.
Press and release the MODE button to
select one of the following riding modes.
Bonneville T120 (all models) and Street Twin
Riding Mode
Description
Standard throttle response.
ROAD
Optimal traction control setting
for road use.
Reduced throttle response when
compared to the ROAD setting,
for wet or slippery conditions.
RAIN
Optimal traction control setting
for road use in rain conditions
and allows minimal rear wheel
slip.
are
available
on
Bonneville T100
all
and

Advertisement

Table of Contents
loading

Table of Contents