Battery Disposal; Battery Maintenance - Triumph Bonneville T100 Series Owner's Handbook Manual

Hide thumbs Also See for Bonneville T100 Series:
Table of Contents

Advertisement

Maintenance and Adjustment
To remove the battery:
Remove the seat (see page 72).
Disconnect
negative (black) lead first.
Release the rear light and accessory
cables.
Release the fixing on the Engine
Control Module (ECM) unit.
Lift the ECM unit and place to the
side allowing access to the battery.
Note
Make sure that the ECM unit is handled
with care during the battery removal or
installation process.
Remove the battery strap.
Detach the USB port socket.
Take the battery out of the case.
Speed Twin and Thruxton RS
1
2
4
3
1.
Battery
2.
Positive (+) terminal
3.
Negative (-) terminal
4.
Battery strap
To remove the battery:
Remove the seat (see page 72).
Disconnect
negative (black) lead first.
140
the
battery
leads,
the
battery
leads,
Remove the battery strap and the
USB port socket.
Take the battery out of the case.

Battery Disposal

Should
the
battery
replacement, the original battery must
be handed to a recycling agent who
will make sure that the dangerous
substances from which the battery
is manufactured do not pollute the
environment.

Battery Maintenance

Warning
Battery
acid
poisonous and will cause damage to
unprotected skin.
Never swallow battery acid or allow it
to come into contact with the skin.
To prevent injury, always wear eye
and skin protection when handling the
battery.
The battery is a sealed type and does
not require any maintenance other
than checking the voltage and routine
recharging when required, such as
during storage.
Clean
the
battery
dry cloth. Make sure that the cable
connections are clean.
It is not possible to adjust the battery
acid level in the battery; the sealing
strip must not be removed.
ever
require
is
corrosive
and
using
a
clean,

Advertisement

Table of Contents
loading

Table of Contents