Street Scrambler Seat Removal; Street Scrambler Seat Installation - Triumph Bonneville T100 Series Owner's Handbook Manual

Street Scrambler Seat Removal

Note
If a passenger seat is fitted, it must be
removed before removing the rider's
seat.
If a luggage rack is fitted, the rider's
seat can be removed without removing
the luggage rack.
Passenger Seat Removal
1
cjyn
1. Passenger seat
2. Fixing
To remove the passenger seat:
• Remove the fixing securing the
passenger seat to the luggage rack
subframe.
• Lift the seat up from the back and
slide rearwards to remove it from
the motorcycle.
2
General Information
Rider's Seat Removal
To remove the rider's seat:
• Remove the passenger seat if fitted.
• Insert the ignition key into the seat
lock and turn it anticlockwise while
pressing down on the rear of the
seat. This will release the seat from
its lock.
• Lift the seat up from the back and
slide rearwards to remove it from
the motorcycle.

Street Scrambler Seat Installation

Warning
To prevent detachment of the seat
during riding, after fitting always
grasp the seat and pull firmly upwards.
If the seat is not correctly secured in
the lock, it will detach from the lock.
A loose or detached seat may cause
loss of motorcycle control and an
accident.
Rider's Seat Installation
To install the rider's seat:
• Engage the seat's tongue under the
fuel tank.
• Press firmly down in the centre of
the seat to engage the lock.
• An audible click can be heard when
the seat is correctly engaged in the
lock.
• Grasp the seat and make sure it is
securely retained.
73