Network; Basic > Wan Port - Eneo IER-28R040005A User Manual

4.7

NETWORK

In NETWORK, users may set the network environment.
4.7.1 Basic > WAN Port
Basic > WAN Port
To set the network WAN port
No.
1
2 DHCP (Dynamic) Select whether to use DHCP (Dynamic).
3
4
5 Port (TCP/RTSP) Enter TCP and RTSP port. Default is 9350.
6
7
8
8 Bandwidth Limit
9
Figure 4-45 NETWORK > Basic > WAN Port
Table 4-46 NETWORK > Basic > WAN Port Item and Description
Name
Check if you use static IP. For using static IP, enter IP address, Subnet
Static IP
Mask, and Gateway.
MAC Address Display the MAC Address.
DNS Select manual and enter DNS; otherwise choose automatic function.
Port (Web) Enter Web port. Default is 80.
Port(IPC) User can access camera directly using IPC port. Default is 5000.
Select the protocol to be used for IP camera remote connection, either http
Edit NAT
or https, or block the connection.
Select bandwidth to limit (Unlimited, 50Mbps, 10Mbps, 5Mbps, 2Mbps,
1Mbps, 500Kbps, 400Kbps, 300Kbps, 200Kbps, and 100Kbps).
Ping Test Enter IP in Ping test and implement the text.
74
Function