Network - Eneo IER-28R080005A Quick Installation Manual

• Selecting the device ID. In case of simultaneous use of equipment, set ID with
difference.
• HD / VGA: Set resolution of a monitor connected to the device.
i Notice: When using many NVRs, set different IDs.
i Notice: Video is not displayed through VGA port if set 3840x2160 resolution. If reso-
lution is set to 3840x2160 and a monitor that does not support this resolution is connect-
ed to the HDMI port, it will automatically change to 1024x768 resolution.

Network

How to set the Network of Easy Installation:
Set each item in Network setting screen.
• WAN Port: Select whether to use static IP or dynamic IP.
• IP Address, Subnet Mask, Gateway, DNS, and Port: As for dynamic IP, enter informa-
tion in each space.
EN
11