Time/Date; Easy Installation Wizard - Eneo IER-28R040005A User Manual

IP Address, Subnet Mask, Gateway, DNS, and Port: As for dynamic IP, enter information in each

space.
2 Press Save button to save set value.
3 Press Next to end Network setting and move the next setting phase.
2.4.4

Time/Date

How to set the time/date of Easy Installation:
1 Set each item in Time/Date setting screen.
Network Time Sync: Select network for synchronizing with time server.

System Time: Not for synchronizing with network time server, set the device time; otherwise

(applying for Daylight saving time), select DST.
Time Zone: Select time zone for the system being installed.

DST Start/End: For applying Daylight saving time, set the application period.

2 Press Save button to save set value.
3 Press Next to end Time/Date setting and move the next setting phase.
2.4.5

Easy Installation Wizard

1 Select to run Easy Installation every time when the system start.
2 Press Save button to save set value and end Easy Installation.
12