Eneo IER-28R040005A User Manual page 36

No. Name
5 Easy Installation
6 Run
If change video type, system will reboot and all setup go to factory default.
Warning
System > F/W Upgrade
Set the upgraded items of the system.
Table 4-5 SYSTEM > System > F/W Upgrade Item and Description
No. Name
1 Current Version
2 Device

Note

32
Select System start to run Easy Installation in starting the system.
Run Easy Installation.
Figure 4-4 SYSTEM > System > F/W Upgrade
Displaying the present firmware version.
Connect USB memory that has files to upgrade to the USB port, select files
to upgrade.
If firmware version in the USB drive is lower than present system version,
system does not display the firmware in the USB drive.
To upgrade through network, recorder must have HDD.
Function
Function