Eneo IER-28R040005A User Manual page 56

Clicking Register displays iSCSI Register screen.
Table 4-26 DEVICE > Disk > iSCSI > Register Item and Description
No. Name
Target Address
1 Target Port
HTTP Port
2 Discover
3 Enable CHAP
4 User Name
5 Password
6 Add


Note


52
Figure 4-25 DEVICE > Disk > iSCSI > Register
Input IP address and ports for iSCSI
Click to search iSCSI storage.
Select Enable CHAP if iSCSI use CHAP authentication.
Enter user name of CHAP authentication.
Enter password of CHAP authentication.
Click to register the discovered iSCSI storage. User can add iSCSI one by one.
If recorder does not have any internal HDD, the recorder reboot automatically
and complete mounting process.
If iSCSI file system is different with recorder, it must be formatted.
If user wants to change recorder IP address, iSCSI must be deleted.
iSCSI device block size must be set as 512byte.
iSCSI device IP address must be set as static IP not DHCP.
Function