Motion - Eneo IER-28R040005A User Manual

4.6.3

Motion

To set and schedule motions across channels
Motion > Setup
To set motions across channels
No.
1
2
3
4
5
6
7
8
9
10
Note
Figure 4-40 Event > Motion > Setup
Table 4-41 Event > Motion > Setup Item and Description
Name
CH Display channels.
Use Select/deselect whether to use motion function in the channel.
Area Display the motion area.
Sens. Select the sense level of the motion sensor (Level 1~10).
Select use time of buzzer (null, 5 sec, 10 sec, 20 sec, 30 sec, 1 min, 10
Beep
min, 30 min, and 1 hour).
Alarm Set alarm output.
Group Rec. Select the camera to record simultaneously.
Noti. Set email notices.
Preset Set preset of PTZ camera.
Copy to Motion Copy motion set value to other channels. For more information about set
Setup value copy, see section "4.5.2 Stream > Main Stream in Stream."
Placing your mouse on Alarm, Group Rec, Noti., Preset and clicking editing
icon( ) in right corner displays Event : Alarm screen. For more information about
Event : Motion screen, see section "4.6.2 Alarm In > Setup in Alarm In."
69
Function