Eneo IER-28R040005A User Manual page 85

Clicking Add Recorder opens Add Recorder.
Figure 4-52 NETWORK > Warp > Registration > Add Recorder
Table 4-53 NETWORK > Warp > Registration > Add Recorder
No. Name
1 Device Type
2 Device List
3 Name
4 Address
5 Port
6 ID
7 Password
8 Check
81
Search all Warp-enabled devices in Auto Detect mode.
Show Warp-enabled device list. Click
device.
Enter the device name. It is entered automatically when selected in the
device list.
Enter the device address. It is entered automatically when selected in the
device list.
Enter the TCP port. It is entered automatically when selected in the device
list.
Enter the ID of the device to be registered.
Enter the password of the device to be registered.
Click the Check button to check if you can connect.
Function
button to search for a new