Preparing Image Make-Up; Outline - Ricoh VT6000 Manual

Outline

Command sheets are fed first so that the machine can recognize the areas
of the original which are to be edited as designated areas.
Command sheet
The command sheet is a sheet of paper for designating areas to be edited.
Command sheets must be made on white or translucent paper, and should
be the same size as the original.
Poor quality paper (such as newsprint, recycled paper, etc.) should not be used
for command sheets because any dark spots or streaks will be read as desig-
nated areas.
Do not use blotting paper or other absorbent papers for command sheets be-
cause ink might leak through the paper and get the exposure glass dirty.
You can designate areas inside the limits given below.
3 mm, 0.12"

PREPARING IMAGE MAKE-UP

5 mm, 0.2"
3 mm, 0.12"
PREPARING IMAGE MAKE-UP
3 mm, 0.12"
7