Ricoh VT6000 Manual page 149

CHANGING DEFAULT SETTINGS (SERVICE PROGRAM MODE)
SP No. Mode
Auto
88 Memory/Class
mode
Tint mode
89
setting
Resettable
Total
113
Master/Copy
Counter
Clear
Resettable
114
Total
Master/Copy
Counter
User Code
120
Mode
140
In this function, the machine stops printing for 2
seconds after one set of prints are completed in Class
or Memory mode. This gives you the chance to
separate each set when you do not have an optional
tape dispenser. For example, you can remove prints
one by one from the paper delivery table or insert one
sheet of paper between the prints.
Default: 0
Adjustment value:
0: Memory/Class mode
1: Auto Memory/Class mode
Reproduce tint image.
Default: 0
Adjustment value:
Used to display the total number of masters and prints.
M: Total number of masters
P: Total number of prints
Clears the resettable total master/copy counter.
Default: 0
Adjustment value:
Selects User Code mode. When you set this function,
you have to also specify the auto reset time. For
details about User Code mode,
Default: User Code mode:
Auto Reset time:
Adjustment value:
User Code mode:
Auto Reset time:
Function
0: No 1: Yes
0: No 1: Yes
see page 143.
0
0
0: No 1: Yes
0: No 1 to 5 minutes