Master Roll Replacement
The Master End indicator (
roll.
1
Open the original table.
Lift the original table release lever
and slide the original table all the
way to the left.
2
Lift the pressure release lever in
the direction of the arrow to re-
lease the feed roller pressure.
3
Remove the used master roll and
pull out both spools. Then, insert
both spools into a new master
roll.
When the Master End indicator lights,
it is necessary to replace the master
roll even if some master remains on
the old roll.
The paper band A prevents new
master roll from being creased. Do
not remove the paper band until you
#
reach step
.
e
) blinks when it is time to replace the master
REPLENISHING SUPPLIES
A
155