Configuring Radius; Figure 35 Radius; Table 23 Radius - ZyXEL Communications PRESTIGE 660H Series User Manual

Table 22 Local User Database (continued)
LABEL
Password
Back
Apply
Cancel

7.8 Configuring RADIUS

To set up your Prestige's RADIUS server settings, click WIRELESS LAN, RADIUS. The
screen appears as shown.

Figure 35 RADIUS

The following table describes the fields in this screen.

Table 23 RADIUS

LABEL
Authentication Server
Active
Server IP Address
Port Number
Chapter 7 Wireless LAN (Prestige 660HW)
DESCRIPTION
Enter a password of up to 31 printable characters (including spaces; alphabetic
characters are case-sensitive) if you're using MD5 encryption and maximum 14 if you're
using PEAP.
Click Back to go to the main wireless LAN setup screen.
Click Apply to save these settings back to the Prestige.
Click Cancel to begin configuring this screen again.
DESCRIPTION
Select Yes from the drop-down list box to enable user authentication
through an external authentication server.
Enter the IP address of the external authentication server in dotted decimal
notation.
The default port of the RADIUS server for authentication is 1812.
You need not change this value unless your network administrator instructs
you to do so with additional information.
Prestige 660H/HW Series User's Guide
98