Prestige 660H/HW Series User's Guide
20.2.1 System Management Terminal Interface Summary
Table 73 Main Menu Summary
#
MENU TITLE
1
General Setup
2
WAN Backup Setup
3
LAN Setup
4
Internet Access Setup
11
Remote Node Setup
12
Static Routing Setup
14
Dial-in User Setup
15
NAT Setup
21
Filter and Firewall Setup
22
SNMP Configuration
23
System Security
24
System Maintenance
25
IP Routing Policy Setup
26
Schedule Setup
99
Exit
20.3 Changing the System Password
Change the Prestige default password by following the steps shown next.
1 Enter 23 in the main menu to display Menu 23 - System Security.
2 Enter 1 to display Menu 23.1 - System Security - Change Password as shown next.
3 Type your existing system password in the Old Password field, for example "
press [ENTER].
225
DESCRIPTION
Use this menu to set up your general information.
Use this menu to setup traffic redirect and dial-back up.
Use this menu to set up your wireless LAN and LAN connection.
A quick and easy way to set up an Internet connection.
Use this menu to set up the Remote Node for LAN-to-LAN
connection, including Internet connection.
Use this menu to set up static routes.
Use this menu to set up local user profiles on the Prestige.
Use this menu to specify inside servers when NAT is enabled.
Use this menu to configure filters, activate/deactivate the firewall
and view the firewall log.
Use this menu to set up SNMP related parameters.
Use this menu to set up wireless security and change your
password.
This menu provides system status, diagnostics, software upload,
etc.
Use this menu to configure your IP routing policy.
Use this menu to schedule outgoing calls.
Use this to exit from SMT and return to a blank screen.
1234
Chapter 20 Introducing the SMT
", and