This chapter covers how to configure your wired Local Area Network (LAN) settings.
23.1 LAN Setup
This section describes how to configure the Ethernet using Menu 3 — LAN Setup. From the
main menu, enter 3 to display menu 3.
Figure 128
23.1.1 General Ethernet Setup
This menu allows you to specify filter set(s) that you wish to apply to the Ethernet traffic. You
seldom need to filter Ethernet traffic; however, the filter sets may be useful to block certain
packets, reduce traffic and prevent security breaches.
Figure 129
If you need to define filters, please read
to define the filter sets.
Chapter 23 Menu 3 LAN Setup
Menu 3 LAN Setup
Menu 3 LAN Setup
Menu 3 - LAN Setup
1. LAN Port Filter Setup
2. TCP/IP and DHCP Setup
5. Wireless LAN Setup
Enter Menu Selection Number:
Menu 3.1 LAN Port Filter Setup
Menu 3.1 - LAN Port Filter Setup
Input Filter Sets:
protocol filters=
device filters=
Output Filter Sets:
protocol filters=
device filters=
Press ENTER to Confirm or ESC to Cancel:
Prestige 660H/HW Series User's Guide
C
H A P T E R
Chapter 31 on page 286
2 3
first, then return to this menu
236