The Adapter Screen; Figure 25 Station Mode: Profile: Activate The Profile; Figure 26 Station Mode: Adapter; Table 14 Station Mode: Adapter - ZyXEL Communications ZyAIR B-220 User Manual

Figure 25 Station Mode: Profile: Activate the Profile

3.5 The Adapter Screen

To set the advanced features on the ZyAIR, click the Adapter tab.

Figure 26 Station Mode: Adapter

The following table describes the labels in this screen.

Table 14 Station Mode: Adapter

LABEL
Adapter
Transmission Rate Select a transmission speed from the drop-down list box. Choose from Fully Auto
Preamble Type
Power Saving
Mode
Save
Chapter 3 Wireless Station Mode Configuration
DESCRIPTION
(default), 1 Mbps, 2 Mbps, 5.5 Mbps and 11 Mbps.
Select a preamble type. Choices are Long Preamble, Short Preamble and
Auto.The default setting is Auto.
Refer to Section 2.4 "Preamble Type" on page 29
Select Enabled to save power (especially for notebook computers). This forces
the ZyAIR to go to sleep mode when it is not transmitting data.
When you select Disabled, the ZyAIR will never go to sleep mode.
Click Save to save the changes back to the ZyAIR and return to the Link Info
screen.
ZyAIR B-220 User's Guide
for more information.
46