Disa (Direct Inward System Access) - Telecom FM OneStream GFX Programming Manual

OneStream Programming Guide
4.3.4.9

DISA (Direct Inward System Access)

After a caller is routed to a DISA Group they will hear a secondary dialtone. They must then enter
the password followed by the # key. If the password is correct they can then dial the new number.
If the password entered is incorrect then the caller will hear an interrupted (unavailable) tone.
If the password is left blank then the caller does not need to enter a password. In this case it is
recommended that the Originating Address field is used to restrict access to known callers.
Name
Enter a unique name to identify this group. You cannot have 2 groups with the same name.
Password
Enter the Password that callers will be required to enter to access the system. This may be left
blank.
37