Telecom FM OneStream GFX Programming Manual page 26

OneStream Programming Guide
Hunting
Select the hunting type required – this controls in which order interfaces are selected to send calls
to. Options are:
a. Sequential (Low First)
Calls are sent to the lowest available interface.
b. Sequential (High First)
Calls are sent to the highest available interface.
c. Cyclic
Calls are sent to interfaces in turn (i.e. A "Round Robin" setup).
Hangup on Busy Detect
Select whether the FXO line should be cleared when a busy signal is detected.
Connect Options
Select the Supervision options for calls from the following:
a. No Supervision
This assumes that the call is connected after dialling.
b. Loop Current Reversal On Connect
Uses the loop current reversal detection to determine that the called party has
answered.
26