Adding A Group - Telecom FM OneStream GFX Programming Manual

OneStream Programming Guide

4.3.1 Adding a Group

To add a new group, use the following procedure:
a. Click the Groups link from the left hand menu.
b. Click the Add Group button. The following screen will be displayed:
c. Select the required Interface Type from the drop-down list. The options for the type of
interface selected will then be displayed.
d. Enter a Name for the Group and fill in all of the required options – these options are
described in detail for each Interface Type below.
e. Click the Add button to add the new group. Click the Cancel button to undo any entry.
Note that if you add or modify a group any active calls will be disconnected.
17