Editing An Existing Group - Telecom FM OneStream GFX Programming Manual

OneStream Programming Guide

4.3.2 Editing an Existing Group

To edit an existing group, use the following procedure:
a. Click the Groups link from the left hand menu.
b. Click the Edit
will be displayed:
c. Make any changes that are required – the options are described for each interface
below.
d. Click the Save button to apply the changes to the Group. Click the Cancel button to
undo any changes made to the Group.
Note that if you add or modify a group any active calls will be disconnected.
18
icon next to the Group that you wish to modify. The following screen