Pre-Defined Ntp Time Servers List; Table 26 Default Time Servers - ZyXEL Communications ZyXEL NWA3160 User Manual

Chapter 7 System Screens
Table 25 SYSTEM > Time Setting
LABEL
Apply
Reset

7.5 Pre-defined NTP Time Servers List

When you turn on the ZyXEL Device for the first time, the date and time start at 2000-01-01
00:00:00. When you select Auto in the SYSTEM > Time Setting screen, the ZyXEL Device
then attempts to synchronize with one of the following pre-defined list of NTP time servers.
The ZyXEL Device continues to use the following pre-defined list of NTP time servers if you
do not specify a time server or it cannot synchronize with the time server you specified.

Table 26 Default Time Servers

ntp1.cs.wisc.edu
ntp1.gbg.netnod.se
ntp2.cs.wisc.edu
tock.usno.navy.mil
ntp3.cs.wisc.edu
ntp.cs.strath.ac.uk
ntp1.sp.se
time1.stupi.se
tick.stdtime.gov.tw
tock.stdtime.gov.tw
time.stdtime.gov.tw
When the ZyXEL Device uses the pre-defined list of NTP time servers, it randomly selects
one server and tries to synchronize with it. If the synchronization fails, then the ZyXEL
Device goes through the rest of the list in order from the first one tried until either it is
successful or all the pre-defined NTP time servers have been tried.
102
DESCRIPTION
Click Apply to save your changes.
Click Reset to reload the previous configuration for this screen.
ZyXEL NWA-3160 Series User's Guide