C
H A P T E R
This chapter describes how to access the ZyXEL Device's web configurator and provides an
overview of its screens.
When your ZyXEL Device is in (CAPWAP) Managed AP mode (NWA-3160 and
NWA-3163 only) the Web Configurator is not available. The ZyXEL Device can
be managed only through the controller AP's web configurator.
2.1 Accessing the Web Configurator
1 Make sure your hardware is properly connected and prepare your computer or computer
network to connect to the ZyXEL Device (refer to the Quick Start Guide).
2 Launch your web browser.
FOR THE LOGIN SECTION:
3 If you have only one ZyXEL Device on your network, enter its System Name in your
browser's address bar and press [ENTER]. The default System Name is NWA-Series.
See
Section 7.2 on page 97
Device's System Name.
If you changed the System Name, and the new name is over 15 characters long,
you must enter NWA-Series instead.
Figure 8 Enter the System Name
ZyXEL NWA-3160 Series User's Guide
Introducing the Web
Configurator
for information on locating and changing the ZyXEL
2
41