Figure 152 Firmware Upload In Process; Figure 153 Network Temporarily Disconnected - ZyXEL Communications ZyXEL NWA3160 User Manual
Nwa-3160 series business wlan access point
Hide thumbs
Also See for ZyXEL NWA3160:
- User manual (362 pages) ,
- Quick start manual (135 pages) ,
- Specifications (2 pages)
Table of Contents
Advertisement
Table 91 Firmware Upload
LABEL
Browse...
Upload
Do not turn off the ZyXEL Device while firmware upload is in progress!
After you see the Firmware Upload in Process screen, wait two minutes before logging into
the ZyXEL Device again.
Figure 152 Firmware Upload In Process
The ZyXEL Device automatically restarts in this time causing a temporary network
disconnect. In some operating systems, you may see the following icon on your desktop.
Figure 153 Network Temporarily Disconnected
After two minutes, log in again and check your new firmware version in the System Status
screen.
If the upload was not successful, the following screen will appear. Click Return to go back to
the F/W Upload screen.
ZyXEL NWA-3160 Series User's Guide
DESCRIPTION
Click Browse... to find the .bin file you want to upload. Remember that you must
decompress compressed (.zip) files before you can upload them.
Click Upload to begin the upload process. This process may take up to two
minutes.
Chapter 19 Maintenance
229
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
