Figure 59 System > Password; Table 24 Password - ZyXEL Communications ZyXEL NWA3160 User Manual

Figure 59 SYSTEM > Password.
The following table describes the labels in this screen.

Table 24 Password

LABEL
Enable Admin at Local Select this check box to have the device authenticate management logins to
Use old setting
Use new setting
Old Password
New Password
Retype to Confirm
Enable Admin on
RADIUS
Use old setting
Use new setting
User Name
Password
ZyXEL NWA-3160 Series User's Guide
DESCRIPTIONS
the device.
Select this to have the ZyXEL Device use the local management password
already configured on the device ("1234" is the default).
Select this if you want to change the local management password.
Type in your existing system password ("1234" is the default password).
Type your new system password (up to 31 characters). Note that as you type
a password, the screen displays an asterisk (*) for each character you type.
Retype your new system password for confirmation.
Select this (and configure the other fields in this section) to have a RADIUS
server authenticate management logins to the ZyXEL Device.
Select this to have a RADIUS server authenticate management logins to the
ZyXEL Device using the RADIUS username and password already configured
on the device.
Select this if you want to change the RADIUS username and password the
ZyXEL Device uses to authenticate management logon.
Enter the username for this user account. This name can be up to 31 ASCII
characters long, including spaces.
Type a password (up to 31 ASCII characters) for this user profile. Note that as
you type a password, the screen displays a (*) for each character you type.
Spaces are allowed.
Note: If you are using PEAP authentication, this password
field is limited to 14 ASCII characters in length.
Chapter 7 System Screens
99