Figure 123 Log Settings; Table 79 Log Settings - ZyXEL Communications ZyXEL NWA3160 User Manual

Figure 123 Log Settings

The following table describes the labels in this screen.

Table 79 Log Settings

LABEL
Address Info
Mail Server
Mail Subject
Send Log to
Send Alerts to
SMTP Authentication
User Name
Password
Syslog Logging
Active
Syslog Server IP
Address
ZyXEL NWA-3160 Series User's Guide
DESCRIPTION
Enter the server name or the IP address of the mail server for the e-mail
addresses specified below. If this field is left blank, logs and alert messages
will not be sent via e-mail.
Type a title that you want to be in the subject line of the log e-mail message
that the ZyXEL Device sends.
Logs are sent to the e-mail address specified in this field. If this field is left
blank, logs will not be sent via e-mail.
Enter the e-mail address where the alert messages will be sent. If this field is
left blank, alert messages will not be sent via e-mail.
If you use SMTP authentication, the mail receiver should be the owner of the
SMTP account.
If your e-mail account requires SMTP authentication, enter the username
here.
Enter the password associated with the above username.
Syslog logging sends a log to an external syslog server used to store logs.
Click Active to enable syslog logging.
Enter the server name or IP address of the syslog server that will log the
selected categories of logs.
Chapter 17 Log Screens
201