Table of Contents
Advertisement
6.1.5
WPA / WPA2
If WPA or WPA2 is selected, the radius server information should be set accordingly.
Radius Server IP Address
Radius Server Port
Radius Key
Encryption Method
Rekey Method
Rekey Time Interval
Rekey Packet Interval
Pre-Authentication
Enter the RADIUS server's IP address.
Enter the RADIUS server's port number. The default port is 1812.
Enter the RADIUS server's IP Address.
Select TKIP, AES or Mixed (TKIP+AES). (AES recommended)
Select Disable/Time/Packet Number. Rekey by Time/Packet Number will
require the user to re-authenticate with the RADIUS server after X
Time/Packet Number, may increase overhead.
Enter Rekey Time Interval.
Enter Rekey Packet Number.
Select Enable/Disable for Pre-authentication. If enabled, this allows a
wireless user to pre-authenticate with the AP before switching from another
AP for quicker roaming.
34
Advertisement
Table of Contents
