Swagman 64684 Instruction Sheet page 3

INSTRUCTION SHEET
PRODUCT: 64684 Dispatch 2 Bike Rack
• Page 3 of 3
• B ikes fitted with large accessories (such as a child carrying seat) will greatly increase the wind resistance and therefore the pressure on the rack
and all vehicle mounting points. Reducing vehicle speed will reduce the chance of any problems occurring because of this situation.
• After reading this manual, should you have any additional questions regarding the compatibility, fitting, and/or use of this rack, please call
your nearest Swagman authorized retail dealer or Swagman Customer Service.
WARNING
Due to the increase in thinner/lighter "carbon frame bikes" this rack may be inappropriate because the hook clamps the frame.
Please check with your bike manufacturer for specific details. We developed the Semi 2.0 and Semi 4.0 for these types of Carbon
frame bikes. They feature ZERO frame contact. The hook arm grabs the wheels and not the frame.
MOUNTING THE BIKE RACK ON A TRAILER OR 5TH WHEEL:
1. Purchaser is advised that the load created by rack and bicycles may exceed the strength of trailer or 5th wheel bumper or other mounting
location. Failure through improper mounting will void rack warranty. If mounted on a bumper check with the manufacturer of the trailer to
insure your trailer has a "continuous steel welded bumper
2. The recommended 14" ground clearance is not sufficient on trailers or 5th wheels. Ground clearance must exceed 15" and will vary upon
application. Damage to bicycles or rack due to ground clearance problems on trailers or 5th wheels is not covered by warranty.
300 - 1880 Government St. • Penticton, B.C. Canada V2A 7J1 • Phone (250) 490-8883 • Fax (250) 490-8885 • www.swagman.net
ATTN: STATE OF CALIFORNIA CONSUMERS
WARNING: Cancer and Reproductive Harm • www.P65Warnings.ca.gov
REV 23/10/19