Caller Id; Type 1: On-Hook Caller Id Transmission; Type 2: Off-Hook Caller Id Transmission; Table 9 Caller Id Signaling Type - ZyXEL Communications ISDN Terminal Adapter Omni.Net Lite User Manual

2 Enter the first number in the Address field beside Port 1 and the second number in the
Address field beside Port 2.
3 Click Submit to TA to save the changes back to the TA.

2.11.2 Caller ID

The caller ID (Caller Identification) information will display on the analog ports. Two caller
ID service types are supported by your TA.

2.11.2.1 Type 1: On-hook Caller ID Transmission

If the caller ID protocol uses DTMF (Dual Tone Multi-Frequency) signal, the caller ID
information includes the phone number and is sent prior to ringing.
If the caller ID protocol uses FSK (Frequency Shift Keying) signal, the phone number will be
sent during ringing.
The caller ID signaling type varies depending on the country.

Table 9 Caller ID signaling type

COUNTRY
Denmark
France
German
India
Ireland
Italy
Netherland
Norway
Portugal
Spain
Sweden
Switzerland
UK
Other (default)

2.11.2.2 Type 2: Off-hook Caller ID Transmission

The Type 2 service uses only FSK and shows call waiting caller ID. If the service is supported
and activated on your TA, the call waiting phone number is displayed when you are on the
phone.
Chapter 2 Using the Utility
COUNTRY CODE CALLER ID SIGNALING TYPE RINGING PATTERN
252 DTMF
219 FSK
237 FSK
214 DTMF
235 FSK
236 DTMF
253 DTMF
245 FSK
220 DTMF
213 DTMF
250 DTMF
251 DTMF
249 FSK
216 DTMF
Omni.Net Lite User's Guide
1 Sec On, 2 Sec OFF
1 Sec On, 2 Sec OFF
1 Sec On, 2 Sec OFF
1 Sec On, 2 Sec OFF
0.4 Sec On, 0.2 Sec OFF,
0.4 Sec On, 2 Sec OFF
1 Sec On, 2 Sec OFF
1 Sec On, 2 Sec OFF
1 Sec On, 2 Sec OFF
1 Sec On, 2 Sec OFF
1 Sec On, 2 Sec OFF
1 Sec On, 2 Sec OFF
1 Sec On, 2 Sec OFF
0.4 Sec On, 0.2 Sec OFF,
0.4 Sec On, 2 Sec OFF
1 Sec On, 2 Sec OFF
44