Summary of Contents for ZyXEL Communications omni.net D
Page 1
ZyXEL OTAL NTERNET CCESS OLUTION omni.net Plus/D ISDN Terminal Adapter Q u i c k S t a r t G u i d e G U I C o n f i g u r a t i o n M a n a g e r l 3 W a y C o n f e r e n c e l C a l l W a i t i n g Call Forwarding l Call Hold/Retrieve l Multiple Subscriber Number Advice of Charge l Caller ID Support l Quick Dial l Intercom...
Installation _____________________________________________________ 1-1 Front Panel Description ________________________________________________1-1 Back Panel Description and Connections (S/T Interface) ________________________1-4 Connect Your omni.net Plus/D (U interface) to ISDN Line _______________________1-5 Power On and Self Diagnostics___________________________________________1-6 Install Windows 95/98/NT Driver (INF file) _________________________ 2-1 Before Installation ____________________________________________________2-1 Start Installing INF file ________________________________________________2-2 Install ZyXEL ISDN Configuration Manager for Windows 95/98/NT ______ 3-1 Setup ZyXEL ISDN Configuration Manager for Windows 3.x ____________ 4-1...
The following graphics are only displayed for the omni.net Plus. However, since the front panel and back panel of omni.net Plus and omni.net D are almost identical, all installation steps below can be applied to both of the omni.net Plus and the omni.net D unless specifically noted. Front Panel Description Phone 1 &...
Front Panel LEDs Function P o w e r L E D L i n k L E D B 1 C h a n n e l B 2 C h a n n e l Auto - A n s w e r C o m p r e s s i o n Data Terminal R e a d y...
Page 7
omni.net Plus/D Quick Start Guide Front Panel Switch When the TA is in command state, pressing the front panel button causes it to dial the default phone number pre-stored in the NVRAM. The default number pointer to the telephone directory is assigned by the AT*Dn command. When the TA is on-line, pressing the button will tear down the connection and bring it into command state.
Back Panel Description and Connections (S/T Interface) Power ON/OFF Switch Power Power Outlet Adapter Back Panel Switch and Connectors ON/OFF P o w e r O N / O F F s w i t c h POWER Input terminal for power adapter. To DTE Serial port DB-25 female connector for connection to the serial port of a DTE (computer/terminal).
Connect Your omni.net Plus/D (U interface) to ISDN Line Connect one end of the RJ-45 connectors to the “ISDN U” jack, and another end to your wall jack, as the following illustration: Phone 1 & Phone 2 for omni.net Plus only RJ-45...
omni.net Plus/D Quick Start Guide Power On and Self Diagnostics Once you have completed all of the installation steps above, flip the omni On/Off switch to the ON (up) position.The unit starts a self-test sequence, where you should see a series of LED lights blinking (LED, B1, B2, AA).
2. Install Windows 95/98/NT Driver (INF file) As a windows 95/98/NT user, for successfully us ing ZyXEL ISDN TA, you have to install INF files to setup your TA first, then install your ZyXEL ISDN Configuration Manager. Before Installation Insert BONUS CD into your CD-ROM drive, it will come out a Setup display as below. Click on Readme files, it will show a complete installation and setup guide for you.
Start Installing INF file If your computer supports Plug & Play, be sure your TA is powered on before starting your computer. If you are using a non-PnP protocol, follow the steps below to perform the installation: Step 1. Double-click on the Modems icon in the Windows 95/98/NT Control Panel folder. Then click the Add button.
Page 13
Step 3. Click Have Disk, then follow the instructions on the following illustrations: Click here to continue. 3. Use Browse to find the location of the updated INF file.
Page 14
Step 4. Click OK to install INF files from your BONUS CD. 4. Select your CD-ROM drive (here is D: ), then you will see the next display. 5. Select INF folder, it will come out a list of INF files in the left column.
Page 15
Plus/D Quick Start Guide Step 5. Use the scroll bar to locate the model name of your ZyXEL ISDN TA, then click once on the new device 'ZyXEL omni.net PLUS" or "ZyXEL omni.net D." Click here for you new omni.net Plus.
Page 16
Step 6. Select the COM port your omni.net PLUS/D is connected. 1. Click the right COM port (COM 1, 2, 3 or 4) 2. Click Next to continue...
Page 18
Step 8. Click Finish to complete INF files installation. Note: You also can download an updated INF file from ZyXEL's FTP, Web Site, or BBS. For more information on INF files included in BONUS CD, please refer to the readme files on BONUS CD. Click here to Finish.
Page 19
Step 9. Click Close to end the INF files installation. The ZyXEL omni.net Plus has successfully installed in your PC. Click Close to end the INF files installation.
3. Install ZyXEL ISDN Configuration Manager for Windows 95/98/NT Once the INF file is successfully installed, you can start installing ISDN Configuration Mangaer & CAPI (32-bit) into your PC. Follow the steps below to proceed your installation: Step 1. Make sure the BONUS CD is in your CD-ROM drive, and the Setup display is active. (If not, double -click the startup.exe to active the Setup display.) Step 2.
Page 22
omni.net Plus/D Quick Start Guide 2. Please wait for the next screen.
Page 23
omni.net Plus/D Quick Start Guide Step 3. Welcome information: Click Next to continue.
Page 24
omni.net Plus/D Quick Start Guide Step 4. Information about ZyXEL ISDN Configuration Manager: Click Next to continue.
Page 25
omni.net Plus/D Quick Start Guide Step 5. Select install item: a. North American users click here, then follow the instructions on your screen. b.European users click here. c. Click Next to continue.
Page 26
omni.net Plus/D Quick Start Guide Step 6. Choose Destination Location : Click Next to continue.
Page 27
omni.net Plus/D Quick Start Guide Step 7. Select Program folder where the ZyXEL ISDN Configuration Manager will been installed.: This is a default folder name. You may type a new one or select one from existing folders list. Click Next to continue...
Page 28
omni.net Plus/D Quick Start Guide Step 8. Start copying files to the following directory: Click Next to continue.
Page 29
Step 9. Click OK to finish the installation of ZyXEL ISDN Configuration Manager. Once the installation is completed, it will create the program group of ZyXEL ISDN Configuration Manager on your start menu. Now, you can start to use the ZyXEL ISDN Configuration Manager.
4. Setup ZyXEL ISDN Configuration Manager for Windows 3.x Step 1. Make sure the BONUS CD is in your CD-ROM device. Step 2. Use File Manager to view the file list of D: (repla ce D: with the drive letter of your CD-ROM drive) Step 3.
North America Outside North America North America Oustide North America FTP File North America Downloads Europe ZyXEL Communications Corporation 6, Innovation Road II Science-Based Industrial Park Hsinchu, Taiwan 300, R.O.C. Tel: 886-3-578-3942; Fax: 886-3-578-2439 sales@zyxel.com.tw E-mail: support@zyxel.comt.tw Customer Support Support@zyxel.com in North America Support@zyxel .com.tw oustide of the US.
Need help?
Do you have a question about the omni.net D and is the answer not in the manual?
Questions and answers