Table of Contents
Advertisement
Omni.Net Lite User's Guide
Table 3 Screens Summary
MENU
Analog Port
2.3 System
Click System to display the screen as shown next. Select your country from the Country
Selection Code drop-down list. The default is Other.
27
SUB-MENU
PPP/MP Parameters
V.24 Signal
Incoming Call Screen
Outgoing Call Screen
Pre-stored Numbers
Advance Setting
Local DN and Options
Incoming Call Screen
Outgoing Call Screen
Pre-stored Numbers
Supplementary Service
FUNCTION
Use this screen to configure PPP/MP settings.
Use this screen to define how to treat data control signal.
Use this screen to set restrictions on incoming data calls.
Use this screen to set restrictions on outgoing data calls
Use this screen to store up to five phone numbers for
data calls on the TA.
Use this screen to configure the advanced settings,
including charge information.
Use these screens under this menu to configure the
analog ports.
Use this screen to assign phone number(s) to voice calls,
set port priority, caller ID service types and dialing
method.
Use this screen to set restrictions on incoming voice calls.
Use this screen to set restrictions on outgoing voice calls.
Use this screen to store up to five phone numbers for
voice calls on the TA.
Use this screen to enable or disable the call waiting
feature.
Chapter 2 Using the Utility
Advertisement
Table of Contents
